RunningKVM

The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

Prerequisites

You will need (see download section):

kvm-release.tar.gz
A VT capable Intel processor, or an SVM capable AMD processor
qemu prerequisites:
- `zlib` libraries and headers
- `SDL` libraries and headers
- `alsa` libraries and headers (optional alsa support: disabled by default but can be enabled with --enable-alsa)
- `gnutls` libraries and headers (optional VNC TLS support: enabled by default but can be disabled with --disable-vnc-tls)
- kernel headers (on Fedora, the kernel-devel package)

On a debian etch system you can install the prerequisites with:

 apt-get install gcc libsdl1.2-dev zlib1g-dev libasound2-dev linux-kernel-headers pkg-config libgnutls-dev

Note: When building from git, you also need gawk.

Please report problems (and successes) to the mailing list.

Unpacking and configuring kvm components

You may wish to take a look at the ["Kernel-optimizations"] page. There exists a [attachment:kvm-26-alt-grab.diff.gz patch] which will change the SDL keygrab combination from ctrl-alt to ctrl-alt-shift. It was written primarily to deal with the heavy use of ctrl-alt-delete in NT-based VMs.

If you are using a patched kernel (e.g. a recent -mm kernel or the kvm git tree), configure the kernel normally, boot into it, and:

tar xzf kvm-release.tar.gz
cd kvm-release
./configure --prefix=/usr/local/kvm --with-patched-kernel
make
sudo make install
sudo /sbin/modprobe kvm-intel
# or: sudo /sbin/modprobe kvm-amd

If you're not running a patched kernel:

tar xzf kvm-release.tar.gz 
cd kvm-release 
./configure --prefix=/usr/local/kvm 
make 
sudo make install 
sudo /sbin/modprobe kvm-intel 
# or: sudo /sbin/modprobe kvm-amd

Note: if sound doesn't play in the guest vm you can add --audio-drv-list="alsa oss" to ./configure as explained in http://www.linux-kvm.com/content/sound-problem-solved

Creating a disk image for the guest

/usr/local/kvm/bin/qemu-img create -f qcow vdisk.img 10G

Installing a guest operating system

sudo /usr/local/kvm/bin/qemu-system-x86_64 -hda vdisk.img -cdrom /path/to/boot-media.iso \ 
   -boot d  -m 384

(kvm doesn't make a distinction between i386 and x86_64 so even in i386 you should use `qemu-system-x86_64`)BR

If you're installing Windows, forcing your emulated machine to not have ACPI support by using -no-acpi could result in much faster installation and performance while running. See ["Windows ACPI Workaround"] for details.

If you have less than 1GB of memory don't use the -m 384 flag (which allocates 384 MB of RAM for the guest). For computers with 512MB of RAM it's safe to use -m 192, or even -m 128 (the default)

Running the newly-installed guest

sudo /usr/local/kvm/bin/qemu-system-x86_64 vdisk.img -m 384

or a slightly more complicated example, where it is assumed that bridged networking is available on tap0; see ["Kernel-optimizations"] for some setup hints:

/usr/local/kvm/bin/qemu-system-x86_64 -hda xp-curr.img -m 512 -soundhw es1370 -no-acpi -snapshot -localtime -boot c -usb -usbdevice tablet -net nic,vlan=0,macaddr=00:00:10:52:37:48 -net tap,vlan=0,ifname=tap0,script=no

(kvm doesn't make a distinction between i386 and x86_64 so even in i386 you should use `qemu-system-x86_64`)

If you're on Debian Etch, substitute `kvm` for `qemu-system-x86_64` (thanks to fromport, soren and mael_). See also the entries under the label "Ubuntu" on the HOWTO page. qemu-system-x86_64`