NetworkingTodo: Difference between revisions

From KVM
No edit summary
No edit summary
Line 163: Line 163:
   feature negotiation seems to be broken
   feature negotiation seems to be broken

* switch dpdk to qemu vhost user
  this seems like a better interface than
  character device in userspace,
  designed for out of process networking
* netmap - like approach to zero copy networking
  is anything like this feasible on linux?

* vhost-user: clean up protocol
* vhost-user: clean up protocol

Revision as of 10:57, 13 November 2014

This page should cover all networking related activity in KVM, currently most info is related to virtio-net.

TODO: add bugzilla entry links.

projects in progress. contributions are still very wellcome!

  • virtio 1.0 support for linux guests
   required for maintainatibility
   Developer: MST,Cornelia Huck
  • virtio 1.0 support in qemu
   required for maintainatibility
   Developer: Cornelia Huck, MST
  • improve net polling for cpu overcommit
   exit busy loop when another process is runnable
   Developer: Jason Wang, MST
  • vhost-net/tun/macvtap cross endian support
   Developer: Cédric Le Goater, MST
  • BQL/aggregation for virtio net
  dependencies: orphan packets less agressively, enable tx interrupt 
  Developers: MST, Jason
  • orphan packets less agressively (was make pktgen works for virtio-net ( or partially orphan ))
      virtio-net orphans all skbs during tx, this used to be optimal.
      Recent changes in guest networking stack and hardware advances
      such as APICv changed optimal behaviour for drivers.
      We need to revisit optimizations such as orphaning all packets early
      to have optimal behaviour.
      this should also fix pktgen which is currently broken with virtio net:
      orphaning all skbs makes pktgen wait for ever to the refcnt.
      Jason's idea: bring back tx interrupt (partially)
      Jason's idea: introduce a flag to tell pktgen not for wait
      Discussion here:
      MST's idea: add a .ndo_tx_polling not only for pktgen
      Developers: Jason Wang, MST
  • enable tx interrupt (conditionally?)
 Small packet TCP stream performance is not good. This is because virtio-net orphan the packet during ndo_start_xmit() which disable the TCP small packet optimizations like TCP small Queue and AutoCork. The idea is enable the tx interrupt to TCP small packets.
 Jason's idea: switch between poll and tx interrupt mode based on recent statistics.
 MST's idea: use a per descriptor flag for virtio to force interrupt for a specific packet.
 Developer: Jason Wang, MST

  • vhost-net polling
     Developer: Razya Ladelsky

  • support more queues in tun
    We limit TUN to 8 queues, but we really want
    1 queue per guest CPU. The limit comes from net
    core, need to teach it to allocate array of
    pointers and not array of queues.
    Jason has an draft patch to use flex array.
    Another thing is to move the flow caches out of tun_struct.
    Developers: Pankaj Gupta, Jason Wang
  • enable multiqueue by default
      Multiqueue causes regression in some workloads, thus
      it is off by default. Documentation/networking/scaling.txt
      Detect and enable/disable
      automatically so we can make it on by default?
      depends on: BQL
      This is because GSO tends to batch less when mq is enabled.
      Developer: Jason Wang
  • rework on flow caches
      Current hlist implementation of flow caches has several limitations:
      1) at worst case, linear search will be bad
      2) not scale
      Developer: Jason Wang

  • ethtool seftest support for virtio-net
       Implement selftest ethtool method for virtio-net for regression test e.g the CVEs found for tun/macvtap, qemu and vhost.
       Developers: Hengjinxiao,Jason Wang

  • bridge without promisc/allmulti mode in NIC
 given hardware support, teach bridge
 to program mac/vlan filtering in NIC
 Helps performance and security on noisy LANs
 Done for unicast, but not for multicast.
 Developer: Vlad Yasevich
  • Improve stats, make them more helpful for per analysis
 Developer: Sriram Narasimhan?
  • Enable LRO with bridging
 Enable GRO for packets coming to bridge from a tap interface
 Better support for windows LRO
 Extend virtio-header with statistics for GRO packets:
 number of packets coalesced and number of duplicate ACKs coalesced
 Developer: Dmitry Fleytman?
  • IPoIB infiniband bridging
 Plan: implement macvtap for ipoib and virtio-ipoib
 Developer: Marcel Apfelbaum

  • interrupt coalescing
 Reduce the number of interrupt
 Rx interrupt coalescing should be good for rx stream throughput.
 Tx interrupt coalescing will help the optimization of enabling tx interrupt conditionally.
 Developer: Jason Wang

  • sharing config interrupts
 Support more devices by sharing a single msi vector
 between multiple virtio devices.
 (Applies to virtio-blk too).
 Developer: Amos Kong

  • Multi-queue macvtap with real multiple queues
       Macvtap only provides multiple queues to user in the form of multiple
       sockets.  As each socket will perform dev_queue_xmit() and we don't
       really have multiple real queues on the device, we now have a lock
       contention.  This contention needs to be addressed.
       Developer: Vlad Yasevich
  • better xmit queueing for tun
       when guest is slower than host, tun drops packets
       aggressively. This is because keeping packets on
       the internal queue does not work well.
       re-enable functionality to stop queue,
       probably with some watchdog to help with buggy guests.
       Developer: MST

projects in need of an owner

  • improve netdev polling for virtio.
 There are two kinds of netdev polling:
 - netpoll - used for debugging
 - rx busy polling for virtio-net [DONE]
   see 1 byte netperf TCP_RR shows 127% improvement.
   Future work is co-operate with host, and only does the busy polling when there's no other process in host cpu. 
 contact: Jason Wang
  • drop vhostforce
 it's an optimization, probbaly not worth it anymore
  • feature negotiation for dpdk/vhost user
 feature negotiation seems to be broken
  • switch dpdk to qemu vhost user
 this seems like a better interface than
  character device in userspace,
  designed for out of process networking
  • netmap - like approach to zero copy networking
  is anything like this feasible on linux?
  • vhost-user: clean up protocol
 address multiple issues in vhost user protocol:
  make more messages synchronous (with a reply)
  Contact: MST

  • Dev watchdog for virtio-net:
       Implement a watchdog for virtio-net. This will be useful for hunting host bugs early.
       Contact: Jason Wang
  • vhost-net scalability tuning: threading for many VMs
     Plan: switch to workqueue shared by many VMs!OpenDocument

     Contact: Razya Ladelsky, Bandan Das
     Testing: netperf guest to guest
  • DPDK with vhost-user
 Support vhost-user in addition to vhost net cuse device
 Contact: Linhaifeng, MST
  • DPDK with vhost-net/user: fix offloads
 DPDK requires disabling offloads ATM,
 need to fix this.
 Contact: MST
  • reduce per-device memory allocations
 vhost device is very large due to need to
 keep large arrays of iovecs around.
 we do need large arrays for correctness,
 but we could move them out of line,
 and add short inline arrays for typical use-cases.
 contact: MST
  • batch tx completions in vhost
 vhost already batches up to 64 tx completions for zero copy
 batch non zero copy as well
 contact: Jason Wang
  • better parallelize small queues
 don't wait for ring full to kick.
 add api to detect ring almost full (e.g. 3/4) and kick
 depends on: BQL
 contact: MST
  • improve vhost-user unit test
 support running on machines without hugetlbfs
 support running with more vm memory layouts
 Contact: MST
  • tun: fix RX livelock
       it's easy for guest to starve out host networking
       open way to fix this is to use napi 
       Contact: MST
  • large-order allocations
  see 28d6427109d13b0f447cba5761f88d3548e83605
  contact: MST
  • reduce networking latency:
 allow handling short packets from softirq or VCPU context
   We are going through the scheduler 3 times
   (could be up to 5 if softirqd is involved)
   Consider RX: host irq -> io thread -> VCPU thread ->
   guest irq -> guest thread.
   This adds a lot of latency.
   We can cut it by some 1.5x if we do a bit of work
   either in the VCPU or softirq context.
 Testing: netperf TCP RR - should be improved drastically
          netperf TCP STREAM guest to host - no regression
 Contact: MST
  • device failover to allow migration with assigned devices
 Contact: Gal Hammer, Cole Robinson, Laine Stump, MST
  • Reuse vringh code for better maintainability
 This project seems abandoned?
 Contact: Rusty Russell
  • use kvm eventfd support for injecting level-triggered interrupts
 aim: enable vhost by default for level interrupts.
 The benefit is security: we want to avoid using userspace
 virtio net so that vhost-net is always used.
 Alex emulated (post & re-enable) level-triggered interrupt in KVM for
 skipping userspace. VFIO already enjoied the performance benefit,
 let's do it for virtio-pci. Current virtio-pci devices still use
 level-interrupt in userspace.
 see: kernel:
 7a84428af [PATCH] KVM: Add resampling irqfds for level triggered interrupts
 68919cac [PATCH] hw/vfio: set interrupts using pci irq wrappers
          (virtio-pci didn't use the wrappers)
 e1d1e586 [PATCH] vfio-pci: Add KVM INTx acceleration
 Contact: Amos Kong, MST       
  • Head of line blocking issue with zerocopy
      zerocopy has several defects that will cause head of line blocking problem:
      - limit the number of pending DMAs
      - complete in order
      This means is one of some of the DMAs were delayed, all other will also delayed. This could be reproduced with following case:
      - boot two VMS VM1(tap1) and VM2(tap2) on host1 (has eth0)
      - setup tbf to limit the tap2 bandwidth to 10Mbit/s
      - start two netperf instances one from VM1 to VM2, another from VM1 to an external host whose traffic go through eth0 on host
      Then you can see not only VM1 to VM2 is throttled, but also VM1 to external host were also throttled.
      For this issue, a solution is orphan the frags when en queuing to non work conserving qdisc.
      But we have have similar issues in other case:
      - The card has its own priority queues
      - Host has two interface, one is 1G another is 10G, so throttle 1G may lead traffic over 10G to be throttled.
      The final solution is to remove receive buffering at tun, and convert it to use NAPI
      Contact: Jason Wang, MST
  • network traffic throttling
 block implemented "continuous leaky bucket" for throttling
 we can use continuous leaky bucket to network
 Developer: Amos Kong
  • Allocate mac_table dynamically
 In the future, maybe we can allocate the mac_table dynamically instead
 of embed it in VirtIONet. Then we can just does a pointer swap and
 gfree() and can save a memcpy() here.
 Contact: Amos Kong
  • reduce conflict with VCPU thread
   if VCPU and networking run on same CPU,
   they conflict resulting in bad performance.
   Fix that, push vhost thread out to another CPU
   more aggressively.
   Contact: Amos Kong
  • rx mac filtering in tun
       the need for this is still not understood as we have filtering in bridge
       we have a small table of addresses, need to make it larger
       if we only need filtering for unicast (multicast is handled by IMP filtering)
       Contact: Amos Kong
  • vlan filtering in tun
       the need for this is still not understood as we have filtering in bridge
       Contact: Amos Kong

  • add documentation for macvlan and macvtap
  recent docs here:
  need to integrate in iproute and kernel docs.
  • receive side zero copy
 The ideal is a NIC with accelerated RFS support,
 So we can feed the virtio rx buffers into the correct NIC queue.
 Depends on non promisc NIC support in bridge.
 Search for "Xin Xiaohui: Provide a zero-copy method on KVM virtio-net"
 for a very old prototype
  • RDMA bridging
  • DMA emgine (IOAT) use in tun
 Old patch here: [PATCH RFC] tun: dma engine support
 It does not speed things up. Need to see why and
 what can be done.
  • virtio API extension: improve small packet/large buffer performance:
 support "reposting" buffers for mergeable buffers,
 support pool for indirect buffers
  • more GSO type support:
      Kernel not support more type of GSO: FCOE, GRE, UDP_TUNNEL
  • ring aliasing:
 using vhost-net as a networking backend with virtio-net in QEMU
 being what's guest facing.
 This gives you the best of both worlds: QEMU acts as a first
 line of defense against a malicious guest while still getting the
 performance advantages of vhost-net (zero-copy).
 In fact a bit of complexity in vhost was put there in the vague hope to
 support something like this: virtio rings are not translated through
 regular memory tables, instead, vhost gets a pointer to ring address.
 This allows qemu acting as a man in the middle,
 verifying the descriptors but not touching the packet data.
  • non-virtio device support with vhost
 Use vhost interface for guests that don't use virtio-net
  • Extend sndbuf scope to int64
 Current sndbuf limit is INT_MAX in tap_set_sndbuf(),
 large values (like 8388607T) can be converted rightly by qapi from qemu commandline,
 If we want to support the large values, we should extend sndbuf limit from 'int' to 'int64'
 Why is this useful?
 Upstream discussion:

vague ideas: path to implementation not clear

  • change tcp_tso_should_defer for kvm: batch more
 in particular, see below
  • tcp: increase gso buffering for cubic,reno
   At the moment we push out an skb whenever the limit becomes
   large enough to send a full-sized TSO skb even if the skb,
   in fact, is not full-sized.
   The reason for this seems to be that some congestion avoidance
   protocols rely on the number of packets in flight to calculate
   CWND, so if we underuse the available CWND it shrinks
   which degrades performance:
   However, there seems to be no reason to do this for
   protocols such as reno and cubic which don't rely on packets in flight,
   and so will simply increase CWND a bit more to compensate for the
  • ring redesign:
     find a way to test raw ring performance 
     fix cacheline bounces 
     reduce interrupts

  • irq/numa affinity:
    networking goes much faster with irq pinning:
    both with and without numa.
    what can be done to make the non-pinned setup go faster?
  • vlan filtering in bridge
       kernel part is done (Vlad Yasevich)
       teach qemu to notify libvirt to enable the filter (still to do) (existed NIC_RX_FILTER_CHANGED event contains vlan-tables)
  • tx coalescing
       Delay several packets before kick the device.
  • bridging on top of macvlan
 add code to forward LRO status from macvlan (not macvtap)
 back to the lowerdev, so that setting up forwarding
 from macvlan disables LRO on the lowerdev
  • virtio: preserve packets exactly with LRO
 LRO is not normally compatible with forwarding.
 virtio we are getting packets from a linux host,
 so we could thinkably preserve packets exactly
 even with LRO. I am guessing other hardware could be
 doing this as well.
  • vxlan
 What could we do here?
  • bridging without promisc mode with OVS

high level issues: not clear what the project is, yet

  • security: iptables

At the moment most people disables iptables to get good performance on 10G/s networking. Any way to improve experience?

  • performance

Going through scheduler and full networking stack twice (host+guest) adds a lot of overhead Any way to allow bypassing some layers?

  • manageability

Still hard to figure out VM networking, VM networking is through libvirt, host networking through NM Any way to integrate?

testing projects

Keeping networking stable is highest priority.

  • Write some unit tests for vhost-net/vhost-scsi
  • Run weekly test on upstream HEAD covering test matrix with autotest
  • Measure the effect of each of the above-mentioned optimizations
 - Use autotest network performance regression testing (that runs netperf)
 - Also test any wild idea that works. Some may be useful.
  • Migrate some of the performance regression autotest functionality into Netperf
 - Get the CPU-utilization of the Host and the other-party, and add them to the report. This is also true for other Host measures, such as vmexits, interrupts, ...
 - Run Netperf in demo-mode, and measure only the time when all the sessions are active (could be many seconds after the beginning of the tests)
 - Packaging of Netperf in Fedora / RHEL (exists in Fedora). Licensing could be an issue.
 - Make the scripts more visible

non-virtio-net devices

  • e1000: stabilize

test matrix

DOA test matrix (all combinations should work):

       vhost: test both on and off, obviously
       test: hotplug/unplug, vlan/mac filtering, netperf,
            file copy both ways: scp, NFS, NTFS
       guests: linux: release and debug kernels, windows
       conditions: plain run, run while under migration,
               vhost on/off migration
       networking setup: simple, qos with cgroups
       host configuration: host-guest, external-guest