MigrationQemu0.8.2

From KVM
Revision as of 08:38, 4 February 2009 by WikiSysop (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

KVM: migrating a VM on Qemu-0.8.2

Interface:

  • Connection Establishment
migration listen  [local_host:port [remote_host:port]] -- listen on a port
migration connect [local_host:port [remote_host:port]] -- connect to a port
migration getfd fd (socket) -- get established connection (not implemented yet)
  • Management
migration start online/offline
migration cancel

Once started, offline migration can not be canceled.

  • Status
migration status
  • Migration Parameters (not implemented yet)
migration set rate min max offline -- set bandwidth control parameters (min, max, offline)
migration set total_time seconds -- set migration total_time (seconds)
migration show -- show migration parameters
  • Help
migration help
  • Example/ HOWTO:

A is the source host, B is the destination host:

  1. Start the VM on B with the exact same parameters as the VM on A, in stopped mode (-S)
  2. Establish Connection (either A or B can listen/connect):
B: migration listen  BIP:port  [AIP:port] (e.g. migration listen 0:4444)
A: migration connect AIP:port   BIP:port  (e.g. migration connect 0:4445 192.168.1.15:4444)
  • Start the migration (always on the source host): A: migration start offline
    1. Check the status (on either host):
    migration status
    • Problems/Todo:
      • handle migration completion better (especially when network problems occur).
      • Online Migration.
      • Finish Interface implementation.
      • Migration does not work while CPU real-mode/protected mode are still changing.