From KVM
(Status)
 
(Patches that yzhou is working on)
Line 1: Line 1:
 
Patches working on:
 
Patches working on:
  
1) params_verify
+
1. params_verify
 +
    Verify all parameters in KVM command line:
 +
    1) Log into the guest
 +
    2) Verify whether cpu counts ,memory size, nics' model,
 +
      count and drives' format & count, drive_serial, UUID
 +
    3) Verify all nic cards' macaddr
  
2) pci_hotplug
+
2. pci_hotplug
 +
    Test pci devices' hotplug
 +
    1) pci_add a deivce (nic or storage)
 +
    2) Compare 'info pci' output
 +
    3) Compare 'reference_cmd' output
 +
    4) Verify whether pci_model is shown in 'pci_find_cmd'
 +
    5) Check whether the newly added pci device works fine
 +
    6) pci_del the device, verify whether could remove the pci device
  
3) run autotest's netperf on two guests
+
 
 +
3. run autotest's netperf on two guests
 +
    Run netperf2 on two guests:
 +
    1) start two guests, one as client while the other is server
 +
    2) run netserver on server guest using control.server
 +
    3) run netperf on client guest using control.client

Revision as of 06:03, 21 July 2009

Patches working on:

1. params_verify

   Verify all parameters in KVM command line:
   1) Log into the guest
   2) Verify whether cpu counts ,memory size, nics' model,
      count and drives' format & count, drive_serial, UUID
   3) Verify all nic cards' macaddr

2. pci_hotplug

   Test pci devices' hotplug
   1) pci_add a deivce (nic or storage)
   2) Compare 'info pci' output
   3) Compare 'reference_cmd' output
   4) Verify whether pci_model is shown in 'pci_find_cmd'
   5) Check whether the newly added pci device works fine
   6) pci_del the device, verify whether could remove the pci device


3. run autotest's netperf on two guests

   Run netperf2 on two guests:
   1) start two guests, one as client while the other is server
   2) run netserver on server guest using control.server
   3) run netperf on client guest using control.client