From KVM
m
Line 37: Line 37:
 
* If needed, write a netperf/iperf test
 
* If needed, write a netperf/iperf test
 
* Write a time drift test (pic/apic/pm_timer)
 
* Write a time drift test (pic/apic/pm_timer)
* Write a test which adds VMs until one of them becomes unresponsive, and records the maximum number of VMs successfully started.
+
* Write a test which adds VMs until one of them becomes unresponsive, and records the maximum number of VMs successfully started. [jasowang]
 
* cpu hotplug [Glauber]
 
* cpu hotplug [Glauber]
 
* pci net hot plug [Glauber]
 
* pci net hot plug [Glauber]
 
* pci block hot plug [Glauber]
 
* pci block hot plug [Glauber]
 
* <s>s3 hibernation</s> [Gleb] [DONE]
 
* <s>s3 hibernation</s> [Gleb] [DONE]
* tap networking
+
* tap networking [jasowang]
* pxe boot * net types
+
* pxe boot * net types [jasowang]
 
* qcow1, qcow2, vmdk, vhd
 
* qcow1, qcow2, vmdk, vhd
 
* qcow2 internal snapshots
 
* qcow2 internal snapshots
 
* <s>Run autotest tests inside Linux guest</s> [Michael] [ALREADY DONE]
 
* <s>Run autotest tests inside Linux guest</s> [Michael] [ALREADY DONE]
 
* Further migration
 
* Further migration
* Multiple nics
+
* Multiple nics [jasowang]
* ksm
+
* ksm [jasowang]
 
* -vga stg, nographics
 
* -vga stg, nographics
 
* kvm unit-tests
 
* kvm unit-tests
* Add unattended guest installations (using kickstart or answer-files)
+
* Add unattended guest installations (using kickstart or answer-files) [jasowang]
 
* kvm_install -- keep src and build directories under <kvm_autotest_root> instead of under kvm_runtest_2.
 
* kvm_install -- keep src and build directories under <kvm_autotest_root> instead of under kvm_runtest_2.
 
* Stable tsc test - http://people.redhat.com/mingo/time-warp-test/MINI-HOWTO
 
* Stable tsc test - http://people.redhat.com/mingo/time-warp-test/MINI-HOWTO
 
* Guest installation with pv-block device/driver (for both windows and Linux)
 
* Guest installation with pv-block device/driver (for both windows and Linux)
* savevm test
+
* savevm test [jasowang]
  
  

Revision as of 13:54, 28 April 2009

KVM-Autotest To-Do list

Framework

  • Verify MD5 sum of ISO image before starting a VM [Michael] [DONE]
  • Enable multiple user controlled port redirections (with -redir) [Michael] [DONE]
  • Implement functions to translate VM ports and addresses (e.g. VM.get_port(), VM.get_address()) [Michael] [DONE]
  • Support TAP networking with a user specified MAC address for each NIC [Michael]
  • Add display parameter to enable user control of the QEMU display method (VNC/SDL/nographic) [Michael] [DONE]
  • Implement VM.clone() -- to be used by tests that need to add new VMs by themselves [Michael]
  • kickstart installation support
  • kvm-autotest auto resolve qemu-kvm backtraces
  • Make sure ppm_utils.image_crop() handles bad input properly [Michael] [DONE]
  • Enable tests to modify a VM's params (while it's down) [Michael]
  • Make tests shorter by using small utility functions that fail a test and display a failure message [Michael]
  • Improve the stepmaker data naming system (e.g. name PPM files according to their MD5 sums) [Michael] [DONE]
  • Redirect guest monitor to serial and capture guest error messages written to console. Log the errors and also scan for specific problems (e.g. oops)
  • Support an "expected to fail" param (at least in our html report)
  • Log a gdb-backtrace for tests (executables) which generate a core dump file.
  • Enable "guest-load" for a VMs before/while tests are running (e.g. migration of a VM, while a movie is playing on it) [Michael]
  • Add support for kvm-trace.
  • Fail upon indentation/white-space problems in the configuration file
  • Add a way to shutdown the VMs when the whole job completes (compared to doing nothing or shutting-down after every test) [Michael]
  • Implement include functionality in the config file parser [Michael] [DONE]
  • Implement kvm_spawn.get_command_status_output() to make sending SSH commands easier [Michael] [DONE]
  • Config file parser: enable selective modification of parameters based on regular expressions, e.g. mem.* ?= 256 [Michael]
  • Support running user specified pre-job, post-job, pre-test and post-test scripts [Michael]
  • Make Step Editor accept a filename command line argument [Michael] [DONE]
  • When running step files, detect frozen (stuck) guests even in the presence of a blinking cursor [Michael] [DONE]
  • Support running tests in parallel with multiple queues for each host [Michael]
  • Automatically convert PPM images in debug dirs to PNG format to save space [Michael]


Tests

  • Find out how to use Autotest's netperf test with guests
  • If needed, write a netperf/iperf test
  • Write a time drift test (pic/apic/pm_timer)
  • Write a test which adds VMs until one of them becomes unresponsive, and records the maximum number of VMs successfully started. [jasowang]
  • cpu hotplug [Glauber]
  • pci net hot plug [Glauber]
  • pci block hot plug [Glauber]
  • s3 hibernation [Gleb] [DONE]
  • tap networking [jasowang]
  • pxe boot * net types [jasowang]
  • qcow1, qcow2, vmdk, vhd
  • qcow2 internal snapshots
  • Run autotest tests inside Linux guest [Michael] [ALREADY DONE]
  • Further migration
  • Multiple nics [jasowang]
  • ksm [jasowang]
  • -vga stg, nographics
  • kvm unit-tests
  • Add unattended guest installations (using kickstart or answer-files) [jasowang]
  • kvm_install -- keep src and build directories under <kvm_autotest_root> instead of under kvm_runtest_2.
  • Stable tsc test - http://people.redhat.com/mingo/time-warp-test/MINI-HOWTO
  • Guest installation with pv-block device/driver (for both windows and Linux)
  • savevm test [jasowang]


Misc

  • Goal -- get accepted into upstream autotest
  • Add docstrings to all functions that still lack them, including the ones in stepmaker.py, stepeditor.py and kvm_tests.py [Michael]
  • Add module headers and docstrings [Michael]
  • Document the setupssh.iso and setuptelnet.iso creation procedures in the wiki
  • Rename all Windows ISOs currently used to their official MSDN names
  • Move Windows-setup iso images into the windows directory. [DONE]
  • Share all the stepmaker data somehow so other people can debug stepfiles
  • Fill the sections "Working with step files" and "Step file creation tips" in the wiki [Michael]
  • Document the kvm_install test in the "Tests" section of the wiki


Bugs

  • Step Maker/Step Editor: fix the GDK MemoryError problem (do not pass gtk.gdk.pixbuf_new_from_data() a 0x0 pixmap even if a ppm file contains one) [DONE]